Lorin C., Maksoud W.A., Berriaud C., Nunio F., Calvelli V., Dilasser G., Stacchi F., Lottin J.-., Pontarollo T.
Ключевые слова: detector, LTS, NbTi, cable-in-conduit conductor, coils, cryogenic systems, stability, helium superfluid, magnets, prototype, design, mechanical properties
Ключевые слова: HTS, REBCO, tapes, Roebel conductors, coils, accelerator magnets, cold mass, design, design parameters, fabrication, review, France
Hobl A., Gehring M., Lorin C., Wu H., Maksoud W.A., Steinmann J., Allard J., Amend J., Schaffran J., Berriaud C. and 20 Authors, Majorovits B., Kreikemeyer-Lorenzo D., Caldwell A., Zoeller H.
Lorin C., Mayri C., Maksoud W.A., Berriaud C., Nunio F., Calvelli V., Dilasser G., Stacchi F., Duraсona U., Pontarollo T., Lottin J., Denarie L.
Ключевые слова: magnets dipole, new, LTS, NbTi, strands, cable-in-conduit conductor, cables, wrapping, Cu-based conductors, helium superfluid, tensile tests, mechanical properties, numerical analysis
Lorin C., Maksoud W.A., Berriaud C., Nunio F., Calvelli V., Dilasser G., Stacchi F., Duraсona U., Pontarollo T., Lottin J.
Scola L., Lorin C., Maksoud W.A., Berriaud C., Nunio F., Calvelli V., Dilasser G., Stacchi F., Pontarollo T., Lottin J., Duranona U.
Scola L., Baudouy B., Lorin C., Maksoud W.A., Berriaud C., Nunio F., Allard J., Moliniй F., Godon P., Calvelli V., Dilasser G., Guihard Q., Solenne N., Stacchi F., GODON R., Duraсona U., Lottin J.-., Pontarollo T., Denarie L., Donga T., Drouen Y., Jurie S., Juster F.-., Millot J.-., Correia-Machado R., Segrestan L.
Scola L., Lorin C., Maksoud W.A., Berriaud C., Godon P., Solenne N., Stacchi F., GODON R., Duraсona U., Pontarollo T., Donga T., Drouen Y., Jurie S., Correia-Machado R., Segrestan L.
Scola L., Lorin C., Maksoud W.A., Berriaud C., Nunio F., Calvelli V., Dilasser G., Stacchi F., Duraсona U., Pontarollo T., Lottin J.
Ключевые слова: LTS, NbTi, cable-in-conduit conductor, magnets dipole, detector, design, design parameters, mechanical properties, stress distribution
Baudouy B., Lorin C., Maksoud W.A., Berriaud C., Calvelli V., Dilasser G., Stacchi F., Duraсona U., Lottin J.-., Pontarollo T.
Ключевые слова: FCC, magnets quadrupole, LTS, Nb3Sn, design, loads, cooling technology, modeling, mechanical properties, stress effects
Ключевые слова: FCC, magnets dipole, design, LTS, Nb3Sn, Rutherford cables, design parameters, modeling, mechanical properties, stress distribution
Farinon S., Verweij A., Auchmann B., Lorin C., Salmi T., Segreti M., Maciejewski M., Munilla J., Prioli M., Caiffi B., Bortot L., Fernandez A.M.
Tommasini D., Arbelaez D.*11, Auchmann B., Bajas H., Bajko M., Ballarino A., Barzi E.*10, Bellomo G., Benedikt M., Bermudez S.I., Bordini B., Bottura L., Brower L.*11, Buzio M., Caiffi B., Caspi S.*11, Dhalle M., Durante M., DeRijk G., Fabbricatore P., Farinon S., Ferracin P., Gao P., Gourlay S.*11, Juchno M.*11, Kashikhin V.*10, Lackner F., Lorin C., Marchevsky M.*11, Marinozzi V., Martinez T., Munilla J., Novitski I.*10, Ogitsu T., Ortwein R., Perez J.C., Petrone C., Prestemon S.*11, Prioli M., Rifflet J., Rochepault E., Russenschuck S., Salmi T., Savary F., Schoerling D., Segreti M., Senatore C., Sorbi M., Stenvall A., Todesco E., Toral F., Verweij A.P., Wessel S., Wolf F., Zlobin A.V.*10
Dhalle M., Bottura L., Usoskin A., Yang Y., Goldacker W., Rossi L., MOLODYK A., Long N., Willering G., Bajko M., Russenschuck S., Fazilleau P., Stenvall A., Ballarino A., Lorin C., Kario A., Rijk G.d., Bajas H., Kirby G., Kate H.t., Durante M., Lahtinen V., Markelov A., Nugteren J.v., Chiuchiolo A., Gao P., Petrone C., Perez J., Ruuskanen J., Mazet J., Murtomaki J., Pincot F., Fontalva A., Schmitz K., Contat P.
Ключевые слова: accelerator magnets, magnets dipole, coils insert, HTS, GdBCO, coated conductors, helium gas, Roebel conductors, cables, cooling technology, design parameters, quench detection, RRR parameter, training effect, degradation studies, critical caracteristics, current-voltage characteristics, n-value, temperature dependence, magnetic field distribution, quench current, current decay, joint resistances, test results
Broggi F., Chiuchiolo A., Dhalle M., Durante M., Fazilleau P., Fleiter J., Gao P., Goldacker W., Kario A., Kirby G., Haro E., Himbele J., Lorin C., Nugteren J.v., Petrone C., Rijk G.d., Ruuskanen J., Senatore C., Statera M., Stenvall A., Tixador P., Yang Y., Usoskin A., Zangenberg N.*10, Murtomaki J., Rossi L., Badel A., Bajas H., Bajko M., Ballarino A., Barth C., Betz U., Bottura L.
Ключевые слова: accelerator magnets, high field magnets, magnets dipole, modeling, numerical analysis, review, plans, HTS, coated conductors, REBCO, Roebel conductors, stacked blocks, coils model, YBCO, PLD process, IBAD process, critical caracteristics, critical current density, deposition setup, uniformity, critical current, ac losses, quench current, temperature dependence, test results
Farinon S., Sorbi M., Stenvall A., Gao Y., Lorin C., Zhao J., Salmi T., Marinozzi V., Prioli M., Caiffi B.
Ключевые слова: FCC, magnets dipole, high field magnets, LTS, Nb3Sn, Rutherford cables, design, design parameters, flux density, distribution, modeling, loads, mechanical properties, stress distribution
Volpini G., Fabbricatore P., Dhalle M., Bottura L., Ogitsu T., Farinon S., Verweij A.P., Ferracin P., Senatore C., Wessel S., Bellomo G., Sorbi M., Bordini B., Toral F., Bajko M., Savary F., Todesco E., Tommasini D., Auchmann B., Russenschuck S., Stenvall A., Ballarino A., Lorin C., Rijk G.d., Bajas H., Salmi T., Schoerling D., Buzio M., Lackner F., Durante M., Segreti M., Rochepault E., Martinez T., Bermudez S.I., Gao P., Marinozzi V., Benedikt M., Perez J., Rifflet J., Munilla J., Ortwein R., Prioli M., Wolf F.
Ключевые слова: FCC, magnets dipole, LTS, Nb3Sn, coils racetrack, model small-scale, design parameters
Ключевые слова: FCC, magnets dipole, LTS, Nb3Al, design parameters, coils pancake, magnetic field distribution, NbTi, mechanical properties, stress distribution, numerical analysis
Fabbricatore P., Farinon S., Sorbi M., Toral F., Verweij A., Tommasini D., Auchmann B., Stenvall A., Lorin C., Salmi T., Schoerling D., Durante M., Marinozzi V., Ruuskanen J., Munilla J., Prioli M.
Ключевые слова: FCC, quench protection, design, magnets dipole, LTS, Nb3Sn, quench detection, hot spots, modeling, numerical analysis, temperature distribution
Sorbi M., Toral F., Tommasini D., Lorin C., Salmi T., Schoerling D., Durante M., Martinez T., Ruuskanen J.
Ключевые слова: FCC, high field magnets, modeling, economic analysis, magnets dipole, LTS, Nb3Sn, wires multifilamentary, design, comparison, arc
Volpini G., Bottura L., Usoskin A., Goldacker W., Rossi L., Bajko M., Fazilleau P., Stenvall A., Ballarino A., Lorin C., Kario A., Rijk G.d., Bajas H., Perez J.C., Kirby G.A., Durante M., Nugteren J.v., Chiuchiolo A., Benda V., Gentini L., Rijllart A., Mazet J., Broekens K., Canale M., Peray N., Murtomaeki J., Pincot F.
Kirby G., Rossi L., Badel A., Bajko M., Ballarino A., Bottura L., Dhalle M., Durante M., Fazilleau P., Fleiter J., Goldacker W., Haro E., Himbele J., Kario A., Langeslag S., Lorin C., Murtzomaki J., Nugteren J., Rijk G., Salmi T., Senatore C., Stenvall A., Tixador P., Usoskin A., Volpini G., Yang Y.*10, Zangenberg N.*11
Ключевые слова: wires round, ac losses, rotating machines, modeling, numerical analysis, angular dependence, neural networks
Ключевые слова: accelerator magnets, Roebel conductors, REBCO, coated conductors, geometry effects, modeling
Ключевые слова: ac losses, rotating machines, modeling, magnetization, n-value, wires round, numerical analysis
Ключевые слова: LTS, NbTi, accelerator magnets, numerical analysis, insulation, mechanical properties, deformation, heat treatment, high field magnets
Bottura L., Rossi L., Fazilleau P., Fleiter J., Ballarino A., Lorin C., Kirby G., Pes C., Durante M., Segreti M., Nugteren J., Rifflet J.
Bottura L., Goldacker W., Caspi S., Rossi L., Fazilleau P., Fleiter J., Stenvall A., Ballarino A., Lorin C., Marchevsky M., Kario A., Rijk G.d., Perez J.C., Kate H.t., Kirby G.A., Durante M., Lopes M., Haro E., Nugteren J.v., Clement S., Gauthier R., Datskov V., Chouika N., Fajardo L., Gentini L., Lambert L., Rijllart A.
Tixador P., Volpini G., Bottura L., Usoskin A., Yang Y., Goldacker W., Rossi L., Senatore C., Bajko M., Rijk G., Fazilleau P., Fleiter J., Stenvall A., Ballarino A., Lorin C., Kario A., Dhalle M.M., Badel A., Salmi T., Kirby G., Durante M., Zangenberg N., Haro E., Nugteren J.
Ключевые слова: aviation application, propulsion system, modeling, rotating machines, numerical analysis, flux density, distribution
Willering G., Bajko M., Fessia P., Hagen P., Todesco E., Auchmann B., Russenschuck S., Lorin C., Feuvrier J., Perez J.C., Sahner T., Kirby G.A., Segreti M., Datskov V.I., Charrondiere M., Bourcey N., Galbraith P., Tabares A.G., Garcia-Perez J., Granieri P.
Ключевые слова: accelerator magnets, LHC, LTS, NbTi, magnets quadrupole, test results, quench, heater, model small-scale, high field magnets
Fessia P., Auchmann B., Russenschuck S., Lorin C., Perez J.C., Karppinen M., Sahner T., Bielert E., Smekens D., Kirby G.A., Durante M., Lepoittevin B., Luzieux S., Segreti M.
Ключевые слова: magnets quadrupole, accelerator magnets, LTS, NbTi, mechanical properties, stress effects, deformation, pressure dependence, quench, high field magnets
Ключевые слова: LHC, accelerator magnets, training effect, quench properties, numerical analysis, modeling, magnets dipole, high field magnets
Ключевые слова: space application, coils solenoidal, numerical analysis, power equipment, harmonics impact
© Copyright 2006-2012. Использование материалов сайта возможно только с обязательной ссылкой на сайт.
Свои замечания и пожелания вы можете направлять по адресу perst@isssph.kiae.ru
Техническая поддержка Alexey, дизайн Teodor.